Fieldmann FZS 3020-B Bedienungsanleitung PDF herunterladen (Seite 10)

EN 10

FZS 3020-B

Assembly

5. ASSEMBLY

Connect the shaft of the brush cutter (Fig. 2).

Insert the bottom part of the shaft (Fig 2, point 1)

into the coupling (Fig 2, point 2), which is a part of

the top part of the shaft. The locking pin

(Fig 2, point 3) must ﬁ t into the hole

(Fig 2, point 4). Then secure both parts in place

by tightening the screw (Fig 2, point 5). For easier

transport of the brush cutter, the shaft can again

be separated.

Using the four included screws, attach the engine

of the brush cutter to the shaft (see ﬁ g. 3).

Install the protective guard on to the shaft using

the supplied screws and nuts (see ﬁ g. 4)

Install the handle into the mount (see ﬁ g. 5). The

handle can be moved along the shaft. In this

way, everybody can select the ideal comfortable

working position. After selecting the ideal working

position, tighten the screws. Fasten the control

cable to the shaft using the supplied draw bands.

Fig. 5

Fig. 3

Fig. 2

Fig. 4

Bolt

Nut

13 42

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 143 144

Keine Kommentare

Fieldmann FZS 3020-B Bedienungsanleitung Seite 10