Fieldmann FZR 1010 Bedienungsanleitung Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 36
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
EN
PUSH REEL MOWER USER'S MANUAL
9
Operation | Maintenance and storage | Packaging | Attaching the grass catcher
8. OPERATION
This push reel mower may mow grass that is up to 10 cm in height. If you want to have a perfectly neat lawn,
you must, however, continuously and regularly care for it to ensure that it does not grow too tall. At the start of
the mowing season (and when mowing a newly established lawn) it is appropriate to set the mowing height
relatively high and then to reduce this height gradually. If you wish to achieve a neat looking lawn, set the mowing
height to approximately 2.5 cm.
You will achieve optimal results when you mow the lawn every week. Grass blades thicken up and grow faster
and are more hardy, grass stalks are kept permanently short (of course unless you live in very arid conditions
and the lawn is insuffi ciently watered). Always mow the lawn when it is rather dry. If you wish to have a neat and
quality appearance of your lawn after you have fi nished mowing, mow in a straight direction at walking pace.
Individual rows should always overlap by a few centimetres to prevent unsightly grass strips from appearing.
9. MAINTENANCE AND STORAGE
Clean the mower after every use using a brush or rag.
Store the mower in a dry location to which children will not have access.
Check that all fastening elements (bolts, nuts, etc.) are fi rmly tightened so that the mower can always be
operated safely.
Immediately replace damaged or excessively worn out parts.
All parts with threads as well as wheels and shafts must be regularly cleaned and lubricated to ensure many
years of service from your mower.
Maintaining your mower in good operating condition will not only ensure its long operational lifetime and
high performance, but will also enable you to mow your lawn with minimal effort.
The blades on the reel are subject a much higher degree of wear than other parts of the mower.
Inspect the blades on the reel regularly making sure that they are properly attached.
Note: The counter-blade (B) is adjusted if the blades on the reel are worn out.
Loosen the adjustment nut (C) (10 mm) on both sides of the mower and set the counter-blade to the
required position. The counter-blade (B) will be set correctly, if a piece of paper is cut when placed between
the blades on the reel and the counter-blade when you rotate one of the wheels on the mower forwards.
10. PACKAGING
This mower is supplied in packaging to prevent its damage during transport. The packaging materials may be
reused or recycled.
11. ATTACHING THE GRASS CATCHER (FIG. 8)
Seat the assembled grass catcher on to the hooks. The grass catcher must also be fastened to the push handle
using the supplied strap (see fi g. 9).
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare